Special Functions - Midea MAE50-S1102 Manual De Usuario

DELAY FUNCTION
The washing machine can be delayed by using this preset feature:
1. Switch the power to ON.
2. Open the water tap and hang the drain hose.
3. Load the laundry and detergent into the washer.
4. Select the appropriate water level according to the
laundry load (quantity of clothing articles).
5. Select the appropriate functions and programs.
6. Press the DELAY button to select the amount of
time to delay the washing cycle.
7. Close the washer lid and press the START/PAUSE
button.
DELAY FUNCTION CONFIRMATION
When the delay function is activated, the
corresponding delay light will flash, and all
other lights will turn off. To check the preset
program and function, press and hold the
DELAY button. Release the DELAY button
to return to the delay status.
QUICK
Use this function for short washing times. This
function is suitable to wash lightly stained clothes
or clothing made from lightweight materials.
COTTON
Use this function to wash clothes or linens
made from cotton.
JEANS
Use this function to wash heavy or seriously
stained clothes.
POWER LOSS MEMORY FUNCTION
The washing machine will automatically resume operation from the previous function prior to power outage.

SPECIAL FUNCTIONS

SPECIAL FUNCTIONS SPECIAL FUNCTIONS SPECIAL FUNCTIONS
CHANGES TO THE DELAY FUNCTION
Press the POWER button to cancel the set delay
function. To change the time on the delay function,
cancel the delay time first, and then press the
DELAY button to reset the program. Follow the
procedures listed above to program a new preset.
ANTI-WRINKLE
Use this function for short washing times.
Using the high water level, this function thoroughly
rinses and washes garments to prevent wrinkling.
AIR DRY
For easily fading, deforming, and non-waterproof
garments, use this function to dry these garments
without regular heating, achieving similar results
when hang-dried.
DELAY FUNCTION LAYOUT
Press the DELAY button to add ONE
HOUR to the digital delay indicator.
After the number reaches 24, press
the DELAY button to add SIX HOURS
to the delay function. After the number
reaches 48, the digital delay indicator
will turn off and reset to default status.
TIME REMAINING
(MINUTES)
DELAY (HOUR)
DELAY LIGHT
15