Maintenance And Care / Error Codes - Midea MAE50-S1102 Manual De Usuario

MAINTENANCE AND CARE MAINTENANCE AND CARE

MAINTENANCE AND CARE / ERROR CODES

MAINTENANCE AND CARE
END OF PROGRAM
The washing machine will sound off a buzz at
the end of any program operation to remind
the user to take out the laundry or to operate it
again.
After the sound, the washing machine returns
to its OFF state with no display and all
indicator lights turned off.
Please shut off the water tap, pull out the
power plug when not in use to avoid water
leakage or accidental fire.
PROBLEM CAUSE OF PROBLEM
Water Fails to reach preset water
Hose level, after injecting water for
Alarm about 16 minutes.
Open Lid Opening the lid after starting
Alarm the delay function. Opening
the lid when the washer is
running a program.
Imbalance Washing machine imbalance
Alarm checked three times.
Drain Draining fails to finish, after
alarm draining for 4 minutes.
Overflow Water inlet hose.
Alarm
NOTE:
1. Overflow alarm: washer water drain valve remains open until manual intervention (shutoff).
2. Once the alarm stops, the washer returns to its previous status prior to the alarm indication.
ERROR CODES ERROR CODES ERROR CODES
MAINTENANCE
Use gentle wash cloths to wipe off any water
and dirt residues from the surface of the
washing machine after every use.
Detergent, propellants, and other chemicals
are prohibited in order to avoid any possible
damage to the washing machine and its
plastic accessories.
Clean the water inlet hose and drain filter to
prevent any possible draining problems (after
every ~10 washes).
Clean any filters to maintain optimal
performance (after every use).
CODE ALARM
SOUND
CODE: E1 Buzzer
Other lights are
10 Seconds
turned off
Every 16
Minutes
CODE: E2 Buzzer
Other lights are
10 Seconds
turned off
Every 16
Minutes
CODE: E3 Buzzer
Other lights are
10 Seconds
turned off
Every 16
Minutes
CODE: E4 Buzzer
Other lights are
10 Seconds
turned off
Every 16
Minutes
CODE: E5 Buzzer
Other lights are
10 Seconds
turned off
Every 16
Minutes
STOPPING
ALARM
Open lid to fix fault.
Then close lid to
stop the alarm.
Open lid to fix fault.
Then close lid to
stop the alarm.
Open lid to fix fault.
Then close lid to
stop the alarm.
Open lid to fix fault.
Then close lid to
stop the alarm.
Open lid to fix fault.
Then close lid to
stop the alarm.
17