Preparing To Connect The Water; Attaching The Edge Protection; Side-By-Side Installation - Thermador T36IB Serie Instrucciones De Instalación

8.

Preparing to connect the water

(only for appliances which require a water connection)
m
CAUTION
Turn off the main water tap to prevent damage caused
by leaking water.
̈
Attach the connecting pipe to the shut-off valve
according to the instructions supplied by the
manufacturer of the ice maker installation kit.
̈
Install the connecting pipe.
Always observe the indicated gap dimensions to
prevent damage to the connecting pipe when pushing
in the appliance.
̈
Attach the connecting pipe to the floor with adhesive
tape.
9.

Attaching the edge protection

To protect the corners of the installation cavity, attach the
supplied protective brackets with adhesive tape.
20

10. Side-by-Side installation

If a side-by-side installation is intended, now connect the
two appliances together.
m
Detailed information on installation can be found in
the separate installation instructions for the sealing kit
for side-by-side installation.
The following work steps must be performed on two
interconnected appliances.