Attaching The Adjusting Rail To The Furniture Door (Freezer Compartment) - Thermador T36IB Serie Instrucciones De Instalación

̈
Using the positioning aid, set both longitudinal sides of
the furniture door parallel.
̈
Using a square, extend the drill hole marks which you
have just made to the vertical marks.
̈
Apply the fixing rib and mark out the holes.
̈
Pre-drill the holes..
̈
Screw on the fixing ribs.
̈
Hang the furniture door on the double threaded bolts.
30
23. Attaching the adjusting rail to
the furniture door
(freezer compartment)
̈
Measure the distance X between the adjusting rail and
the overhead furniture/fixtures.
̈
Loosen the 2 nuts and remove the adjusting rail.
̈
Mark this amount X on the rear of the furniture door.
̈
Determine and mark the centerline of the furniture door.
̈
Put on the adjusting rail and align along the marks.
Mark the drill holes.
̈
Drill the holes.
̈
Screw on the adjusting rail tightly.