Getting Started With Your Byron Bt; Pairing To Your Mobile Phone - Beyerdynamic Byron BT Manual De Usuario

Byron BT – In-ear headset
6.

Getting started with your Byron BT

6.1 Pairing to your mobile phone

Before you use the Byron BT in-ear headset, you have to pair it with
your mobile phone or Bluetooth enabled device. The pairing process
may be different with various mobile phone makers. Please refer to
the appropriate mobile phone manual.
When the in-ear headset is turned off, press the MFB button for
6 seconds to start the pairing mode (blue LED is continuously on).
Select the Bluetooth mode on your mobile phone.
Pairing on first purchasing
• Select the pairing mode with the Bluetooth in-ear headset.
• Pairing with mobile phone (you need to pair with your mobile
within 3 minutes).
• On first purchasing, the in-ear headset enters into pairing mode
automatically when the power is on and the blue LED is
continuously on.
Pairing with mobile phone setting
• Activate the Bluetooth function on your mobile phone according
to the phone manual, search the in-ear headset model name and
select. Then "Pairing" is displayed. (Some mobile phones need
pass key (PIN), then enter 0000).
• If pairing is successful, the message "Connected to phone and
media audio" is displayed and the blue LED glows 5 times. Now
it is ready to use.
Pairing to other devices
• Select the pairing mode with the Bluetooth in-ear headset.
• Deactivate the Bluetooth function of the connected device if
there is a connected device.
• Press the MFB button for 5 seconds to turn off.
• Press the MFB button for 6 seconds. The in-ear headset is turned
on and enters into the pairing mode.
Pairing with mobile phone
• Follow the pairing procedure as described above in the paragraph
"Pairing with mobile phone setting".
• If pairing is successful, the message "Connected to phone and
media audio" is displayed and the blue LED glows 5 times. Now
it is ready to use.
9