The design, manufacturing and requirements for the intended use of the product are based on the
expected service life. These also include the requirements for maintenance, ensuring effective
ness and the safety of the product.
Using the product beyond the specified expected service life leads to increased residual risk and
should only take place subject to the due diligence and deliberations of qualified personnel.
If the service life is reached, the user or a responsible attendant should contact the qualified per
sonnel who fitted the product or the manufacturer's service (see inside or outside of rear cover for
address). Here the user can obtain information about known risks and the current options for
refurbishing the product.
11 Technical data
Dimensions, weights, temperatures
Seat cushion
Dimensions (depth x width)
1)
Weight
[kg (lbs)]
User weight [kg (lbs)]
Temperatures [°C (°F)]
Functional heights
Ischial zone [mm (")]
Support for trochanters [mm (")]
Thigh trough [mm (")]
Edge area [mm (")]
Floam cells
Soft (low fill) [kg (lbs)]
Medium (medium fill) [kg (lbs)]
Firm (high fill) [kg (lbs)]
Component
Foam base
Floam (polymer gel)
Cover of the Floam cells and foam base
Inner cover
Outer cover
1)
Reference size 420 x 405 mm (16.5" x 16"), in ready-to-use condition, without incontinence cov
er
1 Avant-propos
INFORMATION
Date de la dernière mise à jour : 2019-02-12
►
Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit.
►
Respectez les consignes de sécurité afin d'éviter toute blessure et endommagement du pro
duit.
►
Apprenez à l'utilisateur à bien utiliser son produit et informez-le des consignes de sécurité.
►
Conservez ce document.
1)
see label on the cover
3.2 (7)
35 (77)–250 (551)
0 (+32)–+40 (+104)
Adaptable
Adaptable
Adaptable
110 (4.3)
0.075 (0.16)
0.10 (0.22)
0.125 (0.27)
Material
High-density PU foam
Mineral oil, Kraton, acrylic
PU film, 2-layer
Elastane, washable
PU-coated fabric, washable
Français
23