SOFTWARE FEATURES
Safety
Available alarms
lighting measuring cell
Display
Archive
Graphs
Password
Language
Protocol
Overall dimensions
Fig. 4 – NEXT instrument and plate for wall mounting (dimensions in mm.).
Compliance with
low tension standards
Safety relating to: external and internal instrument dosage anomalies and instrument
measurements.
RUN screen with all the measurements taken, the Set Point status, and the last active
alarm. Every alarm, as well as being displayed, will act on the Alarm Relay.
Alarms generated:
Dosing Time Out
Maximum or minimum measurement
Level
Blue: normal operation
Yellow: absence of water flow
Red: alarm situation
The use of a touch graphic display (800x480) allows an intuitive and immediate
graphical representation of the measurements, alarm symbols and main menus,
making the management and programming of the instrument simple and fast for any
operator.
Internal data logger on Flash memory or USB external device. Storage of all the
analogue measurements (Free Chlorine, Combined Chlorine (if present), pH, Redox
and Temperature) with recording steps ranging between 2 minutes.
Possibility to view the graphic trend of all the measurements stored directly on the
instrument, choosing between 3, 6 , 12 or 24 hours as time bases.
Password-protected instrument setup to prevent tampering by unauthorised people.
Selectable between:
Italian, English, Spanish
MODBUS, TCP/IP
ENGLISH 49