Connection Temperature Probe - CTX NEXT Manual De Instalación

Fig. 14 – Lateral Panel

Connection Temperature Probe

For the connection of the temperature probe to remove the caps from the instrument (Fig. 1) and with a screwdriver,
the four locking screws. Then connect the probe to the terminal shown in Fig. 15 and indicated by J6.
(A) 4-wire probe (PT100)
1 RED
2 BLUE
3 YELLOW
4 GREEN
1
2
3
4
5
(B) 2-wire probe (PT100)
1-2 Jumpered – BLACK (BLUE)
3-4 Jumpered – RED (BROWN)
Fig. 2 – Connector temperature sensor
RJ45 plug
USB plug type "A"
Power IN RELE
Power IN Controller
PG7 Cable Glands for external
equipments
ENGLISH 57