Setting The Setpoint Value (4-20Ma) - CTX NEXT Manual De Instalación

Setting the Setpoint Value (4-20mA)

Below is the sequence of operations for setting the set-point values 4-20 mA, to control the pumps (with mA input) proportionally.
The tool has 6 analogue outputs. One of the outputs can be set as RECORDER, Alkaline Setpoint or Acid Setpoint
Touch PRESS TO SET to
1
access the menu
Press Recorder to access the
2 screen for selecting the type of
Output & dosing modes.
The same procedure applies to
relay 2.
Press the OK key to confirm, or
3
ESC to reject the selection.
OUTPUT & DOSING MODES:
- Recorder
- Setpoint+alkaline
- Setpoint+acid
- disabled
ENGLISH 63