Auto & Sleep; Auto Mode; Sleep Mode; Modes Of Operation - Winix NK300 Manual Del Usuario

AUTO & SLEEP

1. Auto Mode

Enables auto operation based on the unit's air quality Smart Sensor.
① Press the Mode button to select
Auto mode.
•The LED 'Auto' light will indicate
when Auto mode is activated, and
operation will begin.
• When in Auto mode the fan speed is automatically adjusted
Note

2. Sleep Mode

Press the Mode button to select
Sleep mode.
• The LED "Sleep" light will indicate when
Sleep mode is activated, and operation will
begin.
• When Sleep mode is selected, the fan speed is automatically
Note
• When Sleep Mode is activated, the Air Quality Indicator LED
English
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases, the fan speed will automatically
increase.
set to Low. The fan speed can be manually changed by
pressing the Fan Speed button, changing the unit into manual
mode.
light is disabled.
AUTO
SLEEP
NK300
12