Operational Safety Guidelines - Motorola Multi-Unit Guia Del Usuario

68012007024_Multi-Unit Charger.book Page 2 Monday, August 11, 2014 4:39 PM
8. The following parts can be ordered from Motorola Radio
Products and Services Division.
W A R N I N G
Description
Wall mount bracket
Top housing
Fuse (located at the bottom of the charger)
Fuse cover
Rubber foot
Screw (for rubber feet)
Screw (for fan housing)
9. This is a Class A product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.

OPERATIONAL SAFETY GUIDELINES

• Turn radio off when charging battery.
• This equipment is not suitable for outdoor use. Use only in dry locations/
conditions.
• Connect equipment only to an appropriately fused and wired supply of the
correct voltage (as specified on the product).
• Disconnect from line voltage by removing the main plug from the outlet.
• The socket outlet to which this equipment is connected should be close by
and easily accessible.
• For equipment using fuses, replacements must comply with the type and
rating specified in the equipment instructions.
• Maximum ambient temperature around the power supply equipment must
not exceed 40 °C (104 °F).
• Make sure the cord is located where it will not be stepped on, tripped over,
or subjected to water, damage, or stress.
• This Multi-Unit Charger utilizes wall mount unit NLN7967.
Multi-Unit Charger Spare Parts
Fan
2
Part Number
NLN7967
RLN5330
5987634G01
6571489S01
0987739G01
7587636G01
0387775G01
0387775G02