Playing Two Sounds Together (Dual Play); Adjusting The Volume Balance In Dual Play (Dual Balance) - Roland HP103e Manual Del Usuario

HP103e/102e – Chapter 2. Performance
Playing Two Sounds
Together (Dual Play)
Simultaneously playing two tones when one key is pressed is
called "Dual play."
1. Simultaneously press the two Tone buttons that
you want to play together.
When Dual play is used, the [Variation] button's indi-
cator will light to indicate the selection of the right
button of the two selected tones.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two Tone
buttons you selected will sound simultaneously.
To cancel Dual play, press any Tone button.
When Dual play is used, only sound number 1 or 2
can be selected.
If you use Dual play with a Tone button for which
tone number 3 or 4 is selected, tone number 1 will be
selected for that Tone button.
To change the tone of the right button of
the two selected tones
1. Press the [Variation] button.
Dual play now features the tone of the left side's tone but-
ton along with the newly selected tone.
To change the tone of the left button of the
two selected tones
Cancel the Dual play, and then re-select the tone.
16
I Adjusting the Volume Balance in Dual Play
(Dual Balance)
You can change the volume balance between the two lay-
ered sounds in Dual play.
1
When the power is turned on, this will be set to "8-2"
(volume of the left button tone - volume of the right
button tone).
1. Hold down the [Transpose] button and press the
[Split] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
2. Press the [-] or [+] button to change the value.
The volume balance changes.
To return to the original volume balance, press the [-] and
[+] buttons simultaneously.
fig.disp-dualbal.e
Volume of the left button tone
Press the [Transpose] or [Split] button, and the button's
indicator will return to the previous state.
2
Volume of the right button tone