Chapter 5. Changing Various Settings; Changing The Damper Pedal's Resonance; Making Detailed Settings (Function) - Roland HP103e Manual Del Usuario

Chapter 5. Changing Various Settings

Changing the Damper
Pedal's Resonance
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal
on the HP103e/102e recreates this resonance (damper reso-
nance) when depressed.
You can select from eight levels of depth for the resonant
sound (resonance level).
This is set to "5" when the instrument is turned on.
* This setting is enabled only with the piano tones. You cannot
set this for other tones.
Hold down the [Brilliance] button, and press the
[-] or [+] button.
The currently specified value will be displayed. Larger
values will produce a deeper effect.
fig.disp-reso
Making Detailed Settings
(Function)
You can make performance-related settings such as tuning
and temperament.
How to enter function mode
1. Hold down the [Split] button, and press the
[Reverb] button.
The HP103e/102e switches to the set mode.
The indicators for the [Split] and [Reverb] buttons and
the button to which the function is assigned start flash-
ing.
Setting the various functions
2. Press the button to which the desired function is
assigned.
The indicators for pressed button, [Split] button, and
[Reverb] button flash.
For details on the contents of each function, refer to the
explanations that follow.
Button
Master Tuning
[Piano]
Function Page
p. 26
Chapter 5. Changing Various Settings
Button
Temperament
[E. Piano]
Stretch Tuning
[Harpsi]
Applying the damper pedal to the
left-hand keyboard area
[Organ]
MIDI send channel
[Strings]
Local Control
[Variation]
Transmitting a recorded
performance
[Play]
Grand Space Mode
[Grand Space]
V-LINK
[Right]
For details on each function, refer to the explanations
below.
3. Press the [-] or [+] button to change the value.
If you press the [-] and [+] buttons simultaneously, the
value will return to the power-up default setting.
I How to exit function mode
4. Press the [Split] or [Reverb] button.
The button's indicator will return to the previous state.
Function Page
p. 26
p. 26
p. 27
p. 31
p. 31
p. 31
p. 27
p. 28
25