Wiring Diagram - Mediclinics E85 Manual De Instalación Y Utilizacion

INSTALLATION
Take always care of:
• Never tighten the wire.
• Not to force the connector's connexion.
• By handling it later recall not to pull the sensor's wire between the base and the cover
Means for disconnection with contact separations at least 3 mm. (0,12") must be incorporated in the
fixed wiring.
During the installation process, the protection areas should be considered according to norm VDE
0100. The hand dryer must only be installed on a closed surface (wall, partition or similar).

WIRING DIAGRAM

Automatic models
H - Heating element
M - Motor
S - Sensor
G - Ground
Models with pushbutton
H - Heating element
M - Motor
T - Timer
G - Ground
-10-