The VARESE emitters are suitable for one-pipe and two-pipe heating installations, in new constructions or the replacement of previously installed radiators,
with possibility of right or left-hand side connection.
Examples of one- and two-pipe installation are below. In all of them the option for connection on the right hand is shown, but all can be carried out with left-
hand connections without changing the model.
*NOTE: All valves, fi ttings, pipes, ducts etc. shown are not supplied in any context by VARESE range suppliers.
ONE-PIPE INSTALLATIONS
Suitable for right or left-hand side connection. Exposed valves. The use of valves with curve for water inlet at the upper outlet.
TWO-TUBE INSTALLATION NEW CONSTRUCTION
Suitable for right or left-hand side connection. Concealed valves with exposed thermostat and accessible from the outside