GE GES-NJGB25IN-1 Manual Del Propietario E Instrucciones De Instalación página 8

Operation
HEALTH AIRFLOW Operation
FAN SPEED
appears on the display. Avoid
the body.
QUIET
COOL TEMP
again,
FAN
direct to the body.
HEAT
TEMP
SMART
DRY
SWING
FAN
HEALTH
MODE
AIRFLOW
SLEEP
POWER CODE
LIGHT
TIMER LOCK
CONFIRM
/CANCEL
and outlet grills of the air conditioner are opened, and
the unit goes on working under the condition before the
grille will close automatically.
Notice:
Cannot pull direct the outlet grille by hand. Otherwise, the
grille will run incorrectly. If the grille is not run correctly,
stop for a minute and then start, adjusting by remote
controller.
Remote controller can memorize each operation status.
when starting it next time, just press ON/OFF button and
unit will run in previous status.
Note:
2. In heating, it is better to select the
3. In cooling, it is better to select the
4. In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon
falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the
actual conditions.
The setting of
function
appears on the display.
The cancel of
function
mode.
mode.
FAN MODE Operation
FAN
MODE
FAN SPEED Fan mode: default low fan speed,
fan mode1, the setting temperature
AUTO
AUTO
will not display, the temperature of indoor
display is 24 ℃
QUIET
COOL TEMP
FAN
HEAT
TEMP
SMART
DRY
SWING
FAN
HEALTH
MODE
AIRFLOW
SLEEP
POWER CODE
LIGHT
TIMER LOCK
CONFIRM
/CANCEL
LOCK LIGHT Operation
LOCK function:
Press the button of the LOCK,
FAN SPEED
" " appears on the display.
AUTO
Avoid children to operate the remote controller
AUTO
Press the button of the LOCK again,
" " disappears.
Then the remote controller can be operated .
QUIET
COOL TEMP
FAN
HEAT
TEMP
LIGHT
SMART
DRY
SWING
FAN
HEALTH
MODE
AIRFLOW
LIGHT function:
SLEEP
POWER CODE
Control the lightening and
extinguishing of the indoor
LIGHT
TIMER LOCK
LED display board.
CONFIRM
/CANCEL
7
LOCK