Safety Instructions For Steam Cleaners; Hazard Levels; Symbols On The Machine; Electric Components - Kärcher SC 2 EasyFix Guía Inicio Rápida

Ocultar thumbs Ver también para SC 2 EasyFix:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Instructions for Steam
Apart from the notes contained herein
the general safety provisions and rules
for the prevention of accidents of the
legislator must be observed.
Warnings and notes that are attached
on the appliance provide important
notes for the safe operation.

Hazard levels

DANGER
Pointer to immediate danger, which leads
to severe injuries or death.
WARNING
Pointer to a possibly dangerous situation,
which can lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation,
which can lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation,
which can lead to property damage.

Symbols on the machine

CAUTION
Danger of scalding by steam!

Electric components

DANGER
 Never use the appliance in pools con-
taining water.
 Do not level the steam jet directly at
equipment that contains electrical com-
ponents, such as the inside of ovens.
 Check the appliance and the accesso-
ries, especially the power cord, the
safety lock and the steam hose for
proper condition.
Do not use the appliance in case of
damage.
 If the power cord is damaged, please
arrange immediately for the exchange
16
Cleaners
by an authorized customer service or a
skilled electrician.
 Promptly replace a damaged steam
hose. You may only use a steam hose
that is recommended by the manufac-
turer.
 Never touch the mains plug and the
socket with wet hands.
 Always disconnect the mains plug and
allow the steam cleaner to cool down
before performing any maintenance
work.
 Repair works may only be performed by
the authorized customer service.
 The connection between the power
cord and extension cable must not lie in
water.
WARNING
 The appliance may only be connected
to an electric supply that has been in-
stalled by an electrician in accordance
with IEC 60364.
 The appliance may only be connected
to alternating current. The voltage must
correspond with the type plate of the
appliance.
 In wet rooms, e.g. bathrooms, connect
the appliance to sockets with a series
connected RCD adapter.
 Only use splash-proof electrical exten-
sion cables with a minimum cross-sec-
tion of 3x1 mm²
 Replace couplings at the power cord or
extension cable only with couplings that
have the same protection against
splashing water and the same mechan-
ical strength.
 Be very careful while cleaning tiled
walls with sockets.
CAUTION
 Make sure that the power cord or exten-
sion cable is not damaged by running
over, pinching, dragging or the like. Pro-
tect the power cords from heat, oil, and
sharp edges.
– 6
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sc 2 easyfix premium

Tabla de contenido