Safety Instructions For High Pressure Cleaners; Danger Or Hazard Levels; Power Connection - Kärcher HDS 10/20-4 M Manual De Instrucciones

Ocultar thumbs Ver también para HDS 10/20-4 M:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37

Safety Instructions for High Pressure Cleaners

Please read and com-
ply with these safety
instructions prior to the initial op-
eration of your appliance. Retain
these safety instructions for use
for future reference or for subse-
quent possessors.
Please read the operating in-
structions for your machine
before using it, and pay par-
ticular attention to the follow-
ing safety instructions.
Warning and information
plates on the machine pro-
vide important directions for
safe operation.
Apart from the notes con-
tained herein the general
safety provisions and rules
for the prevention of acci-
dents of the legislator must be
observed.
Keep packaging films away
from children, there is a risk of
suffocation!

Danger or hazard levels

DANGER
Immediate danger that can
cause severe injury or even
death.
WARNING
Possible hazardous situation
that could lead to severe injury
or even death.
CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
10
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Power connection

DANGER
The voltage indicated on the
type plate must correspond to
the voltage of the electrical
source.
Minimum fuse strength of the
socket (see Technical Data).
Safety class I - Appliances
may only be connected to
sockets with proper earthing.
It is recommended that you
connect this device to a sock-
et that has a 30 mA protection
switch against wrong cur-
rents.
Please use the mains cable
prescribed by the manufac-
turer; the same is also appli-
cable when you replace the
cables. See Operating In-
structions Manual for Order
Number and Type.
Check the power cord with
mains plug for damage be-
fore every use. If the power
cord is damaged, please ar-
range immediately for the ex-
change by an authorized cus-
tomer service or a skilled
electrician.
The appliance may only be
connected to an electrical
supply which has been in-
– 1
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido