CONCORD ULTIMAX Instrucciones De Montaje página 43

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 114
4. Adjusting the seat to the child's size / adjusting the head support and harness
4.1
Grasp the head support at the
top and pull it forwards. You can
then set it to the height that is
right for your child. There are six
possible different positions.
Attention! Always make sure
the belt is positioned correctly,
as shown in 4.2, illustration
(A).
4.2
0033-05
When the child is strapped in,
the shoulder belt should feed
horizontally to the back or incline
slightly upwards, see illustration
(A). If the shoulder belt feeds
downwards as shown in the
illustration (B), then the belt must
be repositioned and inserted
through the next slot up.
To do this proceed as follows:
4.3
0105-04
A
B
To adjust the shoulder belt
positions, the seat shell must
be removed from the base unit
(see 1.1 and 1.2)!
Pull away the back trim located
on the back of the seat shell.
0249-03
0034-02

Publicidad

Tabla de contenido
loading

Tabla de contenido