Alcad 912 Serie Manual De Usuario página 28

4.4.3. Deleting Languages
Just as languages can be added, they can also be deleted, by selecting the option Delete language
from the menu. All the languages which have been added to the list of languages will be shown
on the screen and can be deleted.
NOTE: When the programmer is turned on for the fi rst time, you will see that the language in which the menus are displayed
is English. If you wish to change this: on the Main menu screen, select Confi gure PS programmer and then Select language.
When you have done this, choose one of the other two pre-installed languages – Français or Español – confi rming you choice
with the OK key and pressing ESC to exit from the menu.
5. COMMUNICATIONS
5.1. Infrared Communication
The PS-011 has two types of protocol for infrareds so that it can communicate with both older devices from
the ALCAD range (compatible with this technology) and more recent devices which use IrDA technology.
It must be borne in mind, however, that IrDA technology enables communication that is faster and more
advanced in nature; consequently a greater quantity of data can be sent. On the other hand, it must be
pointed out that it has a greater directivity in communication, an important factor since it means that it
is essential to aim directly and with precision at the infrared receiver for communication to take place
properly.
5.2. USB Communication
This makes it possible to connect external USB memory devices as supports:
- to save and load confi gurations of equipment and installations;
- to load new languages not installed in the programmer;
- to update the PS-011 programmer software.
5.3. SD Card Connection
This enables the connection of SD cards to be used as supports:
- to save and load confi gurations of equipment and installations;
- to load new languages not installed in the programmer;
- to update the PS-011 programmer software.
PS-011 MANUAL
PS-011 MANUAL
IR
IrDA
PAG. 28
ENG