Hot Surfaces; Rotating Parts; Safety Rules - Ariens Max Zoom Manual Del Operador

Shut off e ngine, remove key,
read m anual before you adjust
orrepair unit.
OL4010
NO STEP! Always keep feet
......... _ away from rotating parts.
:®i
OL4420
3. WARNING!
Do not operate mower unless guards are in
operating position or bagger is attached.
Always stand clear of discharge
. area.
0L4430
OL3320
Do not operate mower unless
bagger is attached or guards
are in operating position.
4. HOT SURFACES!
DO NOT touch parts which are
hot from operation. ALWAYS
allow parts to cool.
OS0731
5. ROTATING PARTS
AVOID INJURY. Stay clear of
rotating parts.
OF3450
&DANGER!
AVOID INJURY. Stay clear of
rotating parts.
OL4730
7.DANGERf
Keephandsand_etaway.
8.CAUTION !
@
MAX. FILL
No Smoking
Fill fuel tank to bottom of neck -
MAXIMUM.
,_ WARNING: Over Filling may cause
severe damage to evaporative
system!
Never fill fuel tank when engine is
running, hot or unit is indoors. Never
overfill fuel tank.
Replace fuel cap securely and clean up
spilled fuel.
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury
and/or damage to unit.
ALWAYS remove key and/or wire from spark
plug before assembly. Unintentional engine
start up can cause death or serious injury.
Complete a walk around inspection of unit
and work area to understand:
• Work area • Your unit • All safety decals
Determine which attachments are needed
and can be used safely.
GB-6