WEG SRW 01-UMCT Guía De Instalación, Configuración Y Operación página 8

The other end of cable must be connected to the Control Unit (UC)
through the connector at the top, as shown in procedures 5 (a) and 5 (b).
nOte!
Do not remove the connection cable by pulling the cable
itself, in order not to damage it.
nOte!
The 5 and 6 UMCT's present only the M4 screw mounting
possibility.
8
5 (a) - Connection of the cable to
the UMCT
5 (b) - Connection of the cable to
the UMCT
- English -