How to Turn the Balance Wheel
Always turn the balance wheel toward you .
CD
Balance wheel
Opening and Closing looper cover
To open: (A) While pushing with the thumb to the
right as far as it will go, pull the loooper cover toward
you.
NOTE: When the looper cover is opened, the motor
will switched off immediately although the power
switch is at position"l".
To close: (B) Lift the loooper cover and push it against
the machi ne. The loooper cover snaps into its position
automatically.
CD
Loooper cover
Raising or Lowering the Presser Foot
By raising or lowering the presser foot lifter, the
presser foot goes down or up.
While in operation, keeps the presser foot up upward
side except threading the machi ne or test running
without threads.
NOTE: Thread tension will be released when the
presser foot lifter is lowered.
When the presser foot lifter is lowered, the motor
will switched off immediately although the power
switch is at position"l".
CD
presser bar connection rod
@
Presser foot
28