Dimensions And Cabinet Requirements; General Cabinet Requirements; Outlet Area; Appliance Dimensions - Thermador Masterpiece Serie Guía De Installación

Ocultar thumbs Ver también para Masterpiece Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dimensions and Cabinet Requirements

General Cabinet Requirements

A space of ¼" (6.4 mm) is required between the side
of the appliance and an adjacent wall or cabinet door
when installed at the end of a cabinet run.
The cabinet base must be flat and capable of
supporting the weight of your appliance when in use.
For combination units consult the section Cabinet
Dimension Requirements in the installation manual of
your combination appliance.
The appliance door will overlap the furniture below by
approx. 3/16" (5 mm) when opened. If necessary, you
can elevate the appliance position by adding a panel
in the required thickness on top of the supporting
base. The supporting base must be level and securely
fixed to the cabinet.

Outlet Area

Anywhere within the shaded area the minimal distance
between the appliance and the wall is 1¾ in (45 mm).
For stand alone installation, the electrical connection
box must be mounted to the wall inside the cabinet
cavity anywhere within the shaded area.
For installation as part of a combination of various
THERMADOR appliances, please consult the
installation manual of the combination unit.

Appliance Dimensions

8

Cabinet Dimensions

Wall installation
NOTICE: The cabinet base must be flat and capable of
supporting a weight of at least 142 lbs (64.1 kg).
Under counter installation

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mc30ws

Tabla de contenido