Symptom
Receiver doesn't work.
No audio signals being
received.
The audio transmission
is of poor quality, noisy,
distorted, unclear or no
audio signals being
received.
Battery pack no longer
gives the expected ope-
rating time per charge.
Cause
No battery is inserted
into the receiver.
Battery is discharged
You are too far
away with your receiver
from the transmitter.
If using a 100 Hz televi-
sion and the RadioLight
transmitter is placed on
top of it the sound may
become distored in the
receiver headset.
Battery is discharged
Battery pack is not fully
charged.
Battery pack has
reached its recharging
limit.
Solution
Insert a battery into the
receiver.
Replace battery with a
fully charged one.
Make sure you are not
located too far away
from your transmitter.
Move the RadioLight
transmitter to a position
where the distortion
does not occur.
Replace battery with a
fully charged one.
Recharge the battery for
the correct time.
Replace battery pack
with a new one.
english 19