asalvo 12470 Instrucciones De Uso página 7

HOW TO FOLD THE PARK
1. As shown in Fig. A, pull
up the tape. This will unlock
the safe, hearing a faint
sound, and only then you
can safely lift the base of
the park as shown in B. Take
this tape to an intermediate
height relative to the side of
the park.
CLARIFICATIONS ON CARE AND USE
1. Raw and procedures used in the manufacture of this product materials meet
standards EN 12227: 2010. We advise you not expose the product to sunlight for a long
time. The loss of color of textile due to long exposure to the sun the product does not
pose claimed. The fabric of this park can be washed by hand using cold water.
2. The care and regular maintenance will extend the life of the product. Environmental
influences such as salt air, acid rain and store the product outdoors, contribute to
corrosion of the product. Always keep the product indoors. If you attend these advice,
you will enjoy your product for a long period of time.
2. Remove the latches on
the side tubes. To do this
you must press the button
located in the center of
each tube and pull it slightly
upward first (you'll notice
that the closure is released)
and then down to the tube
fold. Once folded all the
bars close the park pushing
the four legs to the center.
3. Once reached the park,
roll up the mattress on it.
Fasten it properly using the
Velcro provided and finish
the park in the travel bag to
carry it.
EN
7