Brinkmann 810-3821-S Manual Del Propietário página 35

Bezel
Control Knob
Electrode
Side Burner Igniter Lead
Air Vent Handle
Step 20
Place the bezel over the control knob
mounting stem and position over holes in
side burner base and side burner valve
assembly. Attach with two M4 X 10 mm
bolts with washers which come with valve.
Install the side burner control knob
onto valve stem. Tighten up the burner
assembly / bracket bolts loosened
in Step 18.
Step 21
Attach side burner igniter lead wire to the
electrode as illustrated.
Step 22
Attach the air vent using one M5 X 10 mm
bolt and M5 lock nut (black) as illustrated.
Then slide air vent handle onto air vent
stem.
34