List Of Messages - Canon SELPHY ES Serie Guia Del Usuario

List of Messages

The following messages may appear on the camera LCD monitor if
an error occurs during a camera and printer connection.
(Depending on the printer, some messages may not appear.)
• Please refer to the printer's user guide for the appropriate
remedies.
: Printing restarts if you select [Continue] and press the
FUNC./SET button. For the remedies to other messages
that might appear, refer to your printer's user guide.
No Paper
Paper Jam
Paper Error
No Ink
Ink Cassete Error
Low ink level
Ink absorber full
Ink Error
50
Set paper in the printer, then execute printing again.
The paper jammed during printing. Select [Stop] to
cancel printing. Remove the jammed paper, reset
some other paper in the printer, then print again.
Either the paper is not set correctly in the printer, or
paper that differs from the setting has been set in the
printer. Confirm the type and size of paper being used.
Also open the paper output tray if it is closed.
In addition, close the CD-R tray guide when it is open.
The ink tank has run out of ink or there is no ink tank in
the printer. The number of times that the printer's error
lamp blinks, and the error message displayed, will
indicate the appropriate remedy for the error. Please
refer to the printer's user guide for the remedy.
The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
You can restart printing if you select [Continue] in the
error screen. Please request replacement of the ink
absorber from your nearest Canon Customer Support
center listed in the contact list provided with the printer
or in the user guide. The ink absorber cannot be
replaced by the user.
There is a problem with the ink. If the printer's error
lamp is blinking and an error message is displayed,
please refer to the printer's user guide to ascertain the
problem and its remedy.