User Menu - Level Alarm; User Menu - Statistics - Aqua HC151 PH-RX Manual De Programación

HC151 PHRX
Digital multifunction solenoid metering pump
USER Menu – Level Alarm
5.4
When the level alarm is active the display has the following view:
ENTER
USER Menu – Temperature Alarm
5.5
The magnet of 6-7-8 pump model, is equipped with a thermistor that is connected to Standby input.
When the magnet reaches a limit temperature, the pump stops dosing and reports this event through
the following menu:
5.6

USER Menu - STATISTICS

If calibration of pump is done, during pump operation, by any user menu (see previous paragraphs),
you can view the amount of product in ml, the pump has dosed.
ESC
ADSP9500092
LEVEL
ALARM
ENTER
Lev. Al. Time
<N> min
TMP
ALR
USER MENU
ESC
DOS: <N> ml
RESET? YES/NO
14/04/2015 Rev. 1.0
Time spent when the pump is in alarm
<N> is quantity of product dosed
Use Up&Down and Enter to reset
ENGLISH
49/123