GYS PROTIG 201 AC/DC Manual De Instrucciones página 21

Translation of the original instructions
HUMAN-MACHINE INTERFACE (HMI)
Up current
button
Pre-gas
button
Functions
Sleep Mode / Sleep Exit
Sub-processes
AC/DC
AC
A/V display selection
JOB
Pre-gas
Up slope current
Pulse Frequency
PROTIG 201 AC/DC - 201L AC/DC
Sleep Mode /
Sleep Exit
Display
Pulse
Processes Trigger
Frequency Button
mode
Pictograms MMA TIG DC
•
•
•
•
•
Cold current
Creating /
A/V display
button
Recalling /
selection
Deleting JOBS
Downslope
Welding
current
Sub-processes
TIG AC
• • Button to put the product into and out of sleep mode.
In MMA process: access to "Pulse MMA"mode,
•
In TIG DC: access the "Pulse" or "Spot " modes.
• • Choose between TIG "DC", TIG "AC" and TIG "AC - Easy".
Select the parameter to be adjusted between "Frequency"
•
and "Balance".
By default the welding current is displayed on the HMI.
• Pushing this button displays the welding voltage during or
after the welding cycle.
Allows you to recall, create and delete a job. Refer to the
• •
JOB section for more information.
Setting the Pre-Gas time. This time corresponds to the time
• • it takes to purge the torch and to protect the area with gas
before ignition
• • Current rise ramp.
• Pulse frequency setting (only in TIG DC).
TIG AC
Post gas
button
AC
AC / DC
Comments
EN
21