Setting The Temperature; Switching Off; Cleaning And Care - Beurer TS 20 Instrucciones Para El Uso

4.4 Setting the temperature

Setting 0: OFF
Setting 1: minimum heat
Setting 2: medium heat
Setting 3: maximum heat
WARNING
If the heated underblanket is used continuously (for several hours) it is
recommended to use the lowest setting of the control to avoid overheat-
ing of the user.
NOTE:
• The quickest way to heat up the heated underblanket is to select the highest temperature setting
of the controll, first.
• We strongly recommend switching on the heated underblanket approx. 30 minutes before going to
bed and covering it with the quilt to prevent the warmth from escaping.

4.5 Switching off

To switch off the heated underblanket, set the slider for ON/OFF and temperature settings to the OFF (0)
position. The temperature settings are then no longer illuminated.
NOTE:
If the heated underblanket is not used for several days, set the slider for ON/OFF and temperature
settings to the OFF (0) position and remove the mains plug from the socket. Then remove the control
from the heated underblanket by disconnecting it at the conector.

5. Cleaning and care

WARNING
Always remove the supply plug from the mains outlet and remove the controllefrom
the heated underblanket by disconnecting it at the connector.
CAUTION
• The controll must never get in contact to water or other liquids. Otherwise the controll may be damaged.
To clean the controller, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
The textile cover can be cleaned in accordance with the symbols on the label and must be removed from
the heating pad prior to cleaning.
CAUTION
• Note that the heated underblanket must not be dry-cleaned, wrung out, machine dried or ironed.
The heated underblanket is machine washable.
Set the washing machine to a particularly gentle, 30°C cycle (woolens programme). Use a mild detergent
with dosage according to the manufacturer's instructions.
13