AGPtek C5 Manual De Instrucciones página 23

You can find out how to use FM Radio feature here.
Note:
1. When using the radio function for the first time or when there is no station, the station can
be added by [Station list], [Manual Tune], [Auto Tune].
2. If you can't search for an FM radio station, or if the FM sound quality is not good, please
try adjusting the position of the wired headset or antenna. In some remote places, the FM
signal may be poor. Please contact the local staff working in FM broadcasting to confirm
whether the FM signal is covered or not.
3. FM radio supports listening with the wired earphones connection/Bluetooth connec
tion
1) Wired earphones listening: Before turning on the FM radio, you should connect t
o the wired earphones for listening;
2) Bluetooth connection
or antenna to receive the signal, and then connect Bluetooth devices
In FM Radio interface, you can do the following operations:
Pause/Resume
Go to next station
Adjust FM frequency
slightly
Search FM station quickly
Go to FM radio submenu Hold and press
Adjust volume
Lock/Unlock
Hold and press
Home
Start FM recording
FM Radio
listening:
Press Enter button
Press button to go to next saved channel.
If you experiences a bad radio performance, you can try to
adjust the frequency slightly by pressing
improve the effects.
Press and hold
from backward/ forward. If an available station is found, it
will stop searching and play radio immediately.
Press +/ - button
Press button and hold, press
within 1 second
to access its submenu, including：
Back to Home
Record the FM radio you want. When recording starts, you
can press Enter button to pause/ continue recording, or
press button to exit FM recording.
You can use
or button to search stations quickly
21
the wired earphones
button to
or
button again