Projection; Sleep Projection Timer; Backlight - Oregon Scientific RM336PES Manual De Usuario

To activate / deactivate alarm:
Press .
To silence the alarm:
• Press SNOOZE to silence it for 8 minutes (the projection
will also remain on during this time)
OR
• Press any key to turn the alarm off and activate it again
after 24 hours.
To display alarm:
Press .

PROJECTiON

The continuous projection feature operates under the
following circumstances:
• If adapter is connected
- PROJECTiON switch is in ON position
• If no adapter connected
- Sleep timer activated
- Alarm projection selected
To activate continuous projection:
• Slide PROJECTiON switch to ON (when adapter is
connected).
NOTE
To conserve energy, the installed light sensor inside
the unit will disable the continuous projection feature when it
detects a certain level of brightness in the surroundings.
P/N: 300102498-00001-10 REV1
8/72
To project image momentarily:
• Press SNOOZE.
To deactivate continuous projection:
• Slide PROJECTiON switch to OFF.
To flip projected image by 180˚:
• While image is projected, press SNOOZE.
To focus image:
• Turn focus wheel.
To display image vertically:
• Rotate projection head

SlEEP PROJECTiON TiMER

To activate sleep projection timer:
• Press SlEEP.
To select duration:
• Press SlEEP repeatedly.
NOTE
If the adapter is connected and PROJECTiON
switch is in ON position, the projection will remain on despite
sleep timer having reached "0".

BACkliGhT

To activate backlight momentarily:
Press SNOOZE.
•
6