Before Use - SOLAC BE1002 Instrucciones De Uso

spare parts or accessories are
used to replace existing parts/ac-
cessories.
Any misuse or failure to follow the
•
instructions for use renders the
guarantee and the manufactur-
er's liability null and void.
DESCRIPTION
A Protective lid
B Body
C ON/OFF button
D Corundum Roller
E Button to change the Corundum
roller
F Battery housing cover
G Spare roller
H Cleaning brush
Batteries are not included.
ASSEMBLING THE
BATTERIES
Caution: During the handling of
•
batteries, do not touch both poles
at the same time, as this will pro-
voke the partial discharge of the
stocked energy therefore affect-
ing longevity.
Remove the cover of the battery
•
compartment, turning it coun-
ter-clockwise.
Put the batteries in their compart-
•
ment, respecting the polarity.
Close the cover of the battery
•
compartment by inserting the
tabs of the lid into the holes in the
battery compartment (Fig. 1) and
turn clockwise until the arrow is
on the (Fig. 2). Then press the
cover down and turn it clockwise
again until the arrow is positioned
at the (Fig. 3)
It is essential that the batteries
•
should always be the same kind
and the same charge. Never mix
alkaline batteries with normal one
(Carbon-Zinc) and/or rechargea-
ble ones.
INSTRUCTIONS FOR
USE

BEFORE USE:

Make sure that all the product's
•
packaging has been removed.
USE:
Remove the protective cover (A).
•
Turn the appliance on, by using
•
the on/off button.
Gently slide the roller over dry
•
skin, forward
through hardness, calluses and
roughness. Dead skin will grad-
ually exfoliate. Do not press too
hard or the device will stop.
Warnings: Do not use in the same
•
place for more than 3-4 seconds
at a time, and stop if skin be-
comes sore or inflamed.
EN
and backward