Charging The Battery; Before Use - SOLAC Q606 Instrucciones De Uso

ENGLISH
DESCRIPTION
A Lid
B Body
C Cover
D Blends
E Fan
F On/off
G Information light
H Charge conexion
I USB Charging cord
J Brush
K Lint container
If the model of your appliance
•
does not have the accessories
described above, they can also be
bought separately from the Techni-
cal Assistance Service.

CHARGING THE BATTERY

Caution: A new battery is not ful-
•
ly charged and must therefore be
charged before the appliance is
used for the first time.
Charge the battery at an atmos-
•
pheric temperature of between 4
and 40ºC.
Voltaje output of the adaptator
•
must be 3V, 1-2A. (not included).
A pilot light will come on to indicate
•
that the charger is ready to begin
charging the battery.
Approximately 6 to 8 hours are
•
needed for a complete charge of
the battery. Never attempt to over
charge the battery (although it is
recommended that the first charge
of the battery be of 8 hours in du-
ration).
Connect the charger (h) to the jack
•
using the socket on the appliance.
The socket is located at the back
part of the appliance.
The pilot light will come on to in-
•
dicate that the charger is charging
the battery.
At the end of the time period spec-
•
ified above, remove the battery
charger from the appliance.
When the battery is charged dis-
•
connect the charger from the
mains supply.
NB: Do not can use the appliance
•
while it is connected to the charger.
Important: Do not charge the de-
•
vice for more than 16h
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all the product's
•
packaging has been removed.
Before using this product for the
•
first time, it is important to make a
full charge of batteries.
USE:
HOW TO SHAVE CLOTHES:
Place the garment on a smooth
•
surface.
Do not use the appliance on gar-
•
ments that are being worn in order
to avoid damage on the user or
garment.
For best results, please follow
•
these recommendations:
For fast remove, take the remover
•
EN