Descargar Imprimir esta página

BH FITNESS R-306 Instrucciones De Montaje Y Utilización página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
10 FOLDING YOUR UNIT.-
To fold your unit, Fig.22, do the
following:
1.- Loosen the knob (88) fully, by
turning it anticlockwise, and remove
the lock pin,(37) as shown in Fig.(22
step 1).
2.- Fold the sliding seat rail, Fig.(22
step 2).
3.- Insert the lock pin (37), removed
previously, as shown in Fig.(22 step
3).
11 EXERTION SETTINGS.-
To provide an even level of exertion
during exercise, this appliance is
equipped with a tensioning control
(100),
offering
settings, Fig.23.
To
increase
tensioning control (100) clockwise (+)
until the exertion level best suits your
various
exertion
resistance
turn
exercise requirements. To reduce
resistance turn the tensioning control
(100) anticlockwise (-).
12 MOVEMENT & STORAGE.-
The unit is equipped with wheels (W)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.24. Store your unit in a dry place,
preferably not subject to changes in
temperature.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
the
18

Publicidad

loading