Pap Function; Using Subtitles - JVC LT-39HW45U Manual De Usuario

Chapter 5
Using more of your TV
Setting up your favourite channels
You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select the favourite list
and press OK to enter.
3. Press the blue button to start editing your favourite
list. Press ▲/▼ to scroll through the channel list
and press OK to select or deselect it.
4. Repeat this procedure to setup other favourite
channels.
5. Press LIST/EXIT to exit.
Shortcut operation: Press FAV on the remote control
to directly enter Channel list selection.
ECO dynamic backlight
1. Press MENU on the remote control and select
Picture > ECO dynamic back light.
Press ◄/► to select desired power saving mode
2.
to achieve the desired power saving effect. The
Picture preset option under Picture will now be
set to Personal simultaneously.
3. Press EXIT to close the menu.
Shortcut operation: Press ECO on the remote
control to perform the same function mentioned above.
Viewing TV using the 3D function (* not
available for some models)
:
WARNING
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom, stop
viewing 3D TV, remove your 3D glasses and rest.
• Watching 3D videos too closely or for a long period
of time may harm your eyesight.
• A responsible adult should frequently check on
children who are using the 3D function.
• Do not use the 3D glasses for any other purpose
than viewing 3D videos on a 3D TV.
• Do not use the 3D function or 3D glasses while
walking or moving around, otherwise it may result in
injuries due to running into objects, tripping, and/or
falling.
Press MENU on the remote control and select
1.
Picture > 3D, then press OK/► to enter. (Refer to
Figure 4.)
2. 3D Mode: Wear the 3D glasses first, then press
◄/► to select the right 3D input format among
Top and Bottom, Side-by-Side, 2D-to-3D, Line
interleave and Frame sequential for the playing
3D video.
Select
3. L-R Switch: On or Off
for the left and right eyes with better visibility.
Adjust the stereoscopic effect of
4. Depth of Field:
the 3D image converted from 2D image.
to adjust the 3D video
EN 7
Select Left or Right to display the
5. 3D-to-2D:
image for the left or right eye only. This function is
deactivated when 3D Mode is set to 2D-to-3D or
Off.
6. Press EXIT to close the menu.
Notes:
- 3D glasses from other manufacturers may not be
supported.
- All photo functions are disabled in 3D mode.
- If changing to a different signal source or
accessing the Opera browser, 3D mode will be
automatically disabled.
- Some 3D modes may not be available depending
on the input format of the 3D video source.
- Supported 3D modes:
ATV, AV, CMP: 2D-to-3D
DTV, HDMI, USB, Videos from the Internet:
Top and Bottom, Side-by-Side, 2D-to-3D, Line
interleave, Frame sequential
- 3D function in USB mode: During the playback
of a selected video from USB, press MENU to
display the video menu in the browser mode, then
select 3D Mode. For more detail information, refer
to the above related descriptions.

PAP function

Use this function to display the pictures from different
source inputs side by side. Note that one window is
for both analogue and digital TV inputs, the other is
for VGA, HDMI and CMP inputs. (Note: Not available
for AV-Scart on both windows.)
1. Press MENU to display the main menu.
2. Select PAP and press OK to enter.
3. Select the PAP option, and press ◄/► to turn on/
off PAP function.
4. Select TV position, press ◄/► to reposition the
TV window.
5. Press ◄/► to toggle the focus window.
6. When the focus is on the TV window, the
alphanumeric buttons and P+/- work in TV. When
the focus is on the other window, P+/- switches
available external sources.

Using subtitles

You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turning on/off subtitles
1. Press MENU on the remote control and select
Options > Subtitle.
Press OK/► to enter. (Refer to Figure 5.)
2.
3. Select the Subtitle option, and press ◄/► to select
On/Off to turn on/off subtitles.
Using more of your TV