Overview; Features - Sony Exwave HAD SNC-CS3N Manual De Instalación

• The Network Camera system and related service is not a security service. When monitoring the image
and audio of the purchased Network Camera, there is a risk that the monitoring image or audio may be
viewed or used by a third-party via the network. It is provided only as a convenience for people to
easily access their cameras via the internet.
When you use the Network Camera, please take into account and ensure the privacy and portrait right
of the object at your own responsibility.
• Access to the camera or system is limited to the user setting up a user name and password only. No
further authentication is provided nor should the user presume that such filtering is done by the service.
• Sony assumes no liability should the service related to the Network Camera goes down or interrupted
for whatever reason.

Overview

B

Features

High-quality monitoring via the
network
You can monitor a high-quality live image
from the camera using the Web browser on
the computer connected to the 10BASE-T or
100BASE-TX network. The maximum
frame rate is 30 FPS for the SNC-CS3N and
25 FPS for the SNC-CS3P.
Up to 50 users can view the image from one
camera at the same time.
Available Web browsers
Microsoft Internet Explorer Ver. 5.5 or 6.0
(Available OS: Windows 98/ 98SE/ Me/
NT4.0/ 2000/ XP)
High-sensitivity and superior
picture quality
The 1/3 type Exwave HAD
superior picture quality – high horizontal
resolution, high sensitivity, an excellent
signal-to-noise and a low smear level.
Image recording on the built-in
memory
You can record still images from the camera
onto the camera's built-in memory (about 8
MB). You can record a still image at the
moment when a trigger by the external
sensor input, built-in activity detection
function or manual trigger button occurs, or
still images sequentially for a determined
period before and after the trigger. Periodic
recording of still images is also possible.
Image transmission using an E-
mail or FTP server
You can send a still image from the camera
as an attachment of an E-mail or to an FTP
4
GB
Features
TM CCD offers
server, at the moment when a trigger by the
external sensor input, built-in activity
detection function or manual trigger button
occurs. You can also send still images
sequentially for a determined period before
and after the trigger to an FTP server, or send
them periodically.
If you use the FTP client software of the
computer, you can also search for and
receive the still image recorded in the built-
in memory.
Alarm output
The camera is equipped with two sets of
alarm outputs. You can use them to control
peripheral devices by synchronizing with the
external sensor inputs, built-in activity
detection function, manual trigger button, or
timer.
Transparency-type RS-232C
interface
If you connect peripheral devices to the
camera via the RS-232C interface, you can
control the devices from the computer via
the network and receive data from these
devices.
Analog video output
The analog video output allows connecting a
VTR or TV monitor for local image
recording and monitoring.
• Microsoft, Windows, Internet Explorer and
MS-DOS are registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
• Exwave HAD TM : Exwave Hole-
Accumulated Diode
"Exwave HAD TM " is a trademark of Sony
Corporation.
• CCD: Charge-Coupled Device