Package Contents; Hardware Installation - D-Link DCS-5300G Guía De Instalación Rápida

Quick Installation Guide
Wireless Internet Camera with Pan and Tilt

Package Contents

If any of the items are missing, please contact your reseller.
DCS-5300G CD-ROM
with Manual
Wireless
and Software
Internet
Camera with
Pan and Tilt

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector located on
the Internet Camera's back panel and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Internet Camera's back panel(labeled DC 12V) and
connect it to an AC power outlet.
Both the red and green LEDs will flash alternately and only the red
LED will remain lit. The green LED will not come on until you have
configured your camera.
If you already connect your device correctly, please refer to the Manual in the CD for software utility
installation step by step. You will install a software and use it to search and connect the camera.
DCS-5300G
A/V Cable & Power Adapter
Category 5
Ethernet
Cable
2
2 Antennas Camera
Stand