Environmental Parameters - Invacare Aquatec 90000 Manual Del Usuario

IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
Cleaning Intervals
IMPORTANT!
Regular cleaning and disinfection enhances
smooth operation, increases the service life and
prevents contamination.
Clean and disinfect the product
– regularly while it is in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instruction
1. Use water and a mild, non-abrasive cleaner to clean the
product.
2. Dry with a cloth.
Cleaning in a Clinical Environment
In addition to cleaning as described above we
recommend cleaning the product prior to the use by
another patient, after ending of the period of use or
on a regular basis (depending on which occurs first) at
• 90 °C for 1 minute
• 85 °C for 3 minutes
• 80 °C for 10 minutes
CAUTION!
Risk of burning Skin
– Allow the product to cool after cleaning.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
12 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
1470052-D
13 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
• Inspection
• Cleaning and disinfection
For detailed information, see 11 Maintenance, page 4 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
14 Technical Data (Fig. 9a – c)
Dimensions
365 mm
A
425 mm
B
20 / 60 / 100 mm
C
540 mm
D
380 mm
E
475 mm
F
Weights
C = 20 mm
Aquatec
C = 60 mm
90000
C = 100 mm 4.4 kg
Maximum
150 kg
user weight
Materials
PP
j
All product components are corrosion resistant and do not
contain natural rubber latex.

15 Environmental Parameters

Operating Conditions
Ambient temperature
Relative humidity
Storage and Shipping Conditions
Ambient temperature
Relative humidity
1 Einleitung
Diese Gebrauchsanweisung enthält wichtige Informationen zur
Handhabung des Produkts. Lesen Sie die Gebrauchsanweisung
sorgfältig durch und befolgen Sie die Sicherheitsanweisungen,
damit eine sichere Verwendung des Produkts gewährleistet
ist.
Invacare behält sich das Recht vor, Produktspezifikationen
ohne vorherige Ankündigung abzuändern.
Vergewissern Sie sich vor dem Lesen dieses Dokuments,
dass Sie die aktuelle Fassung haben. Die jeweils aktuelle
G 230 / 270 / 310 mm
H 30 / 70 / 110 mm
200 mm
I
450 mm
J
205 mm
K
275 mm
L
with without
armrests armrests
3.6 kg 2.1 kg
4 kg 2.5 kg
2.9 kg
PP
k
10 - 40 °C
15% - 93%, non-condensing
0 - 40 °C
30% - 75%, non-condensing
IdeI
5