Setting Sensor Dry - Maytag NEPTUNE MD98 Manual Del Usuario

S
S
ETTING ENSOR
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to "wake" the controls.
"sensor dry" – automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (very dry to
damp dry) is reached.This cycle is recommended for the majority of loads including delicates, wrinkle free and cotton/sturdy items
like towels, bedding and jeans.
Step 1
Select "sensor dry". The next screen will be the Review
Screen. If the selections are correct, press Start/Pause.
If changes need to be made, follow the next steps.
Step 2
Select dryness level. The dryness level ranges
from very dry to damp dry. Select the level
appropriate for the load. The "normal
dry" level will be used for most loads.
Step 3
Select appropriate temperature; "regular",
"medium", "delicate" or "extra low".
D
RY
regular – for sturdy cottons or those labeled "Tumble Dry."
medium – for permanent press, synthetics, lightweight
cottons or items labeled "Tumble Dry Medium."
delicate – for heat sensitive items labeled "Tumble Dry
Low" or "Tumble Dry Warm."
extra low – Provides the lowest heated dry temperature
possible. "Extra Low Temperature" is lower than "Delicate."
very dry – used to completely dry sturdy or bulky items
including towels and jeans.
more dry – uses slightly less time to dry than very dry with
similar results. May find some blue jean seams slightly damp.
normal dry – used for drying the majority of loads.
less dry – still provides the benefit of the load being slightly
damp, but items will dry faster once they are laid flat or hung
to dry.
damp dry – designed to partially dry items. Used for items
that lay flat or hang to dry.
6
Cont.