Descargar Imprimir esta página

Using The Controls; Setting Sensor Dry - Maytag NEPTUNE MD75 Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

U
SING THE
S
D
ETTING YOUR
RYER
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to "wake" the controls.
S
S
D
ETTING
ENSOR
Sensor Dry – automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (very dry to damp
dry) is reached.This cycle is recommended for the majority of loads including delicates, wrinkle free and cotton/sturdy items like towels,
bedding and jeans.
Home
sensor dry
air fluff
time dry
(no heat)
more cycles
favorites
Step 1
Select "Sensor Dry". The next screen will be the Review
Screen. If the selections are correct, press Start/Pause. If
changes need to be made, follow the next steps.
Press "start/pause" or
change your selections below.
Dryness
options
dryness level
very dry
more dry
normaldry
cycle chime loud
remind chime ON
normal dry
regular
temperature
less dry
damp dry
Step 2
Select dryness level. The dryness level ranges
from very dry to damp dry. Select the level
appropriate for the load. The "Normal Dry"
level will be used for most loads.
Press "start/pause" or
change your selections below.
Temperature
options
dryness level
cycle chime loud
normal dry
remind chime ON
regular
medium
medium
delicate
extra low
temperature
Step 3
Select appropriate temperature; "Regular",
"Medium", "Delicate" or "Extra Low".
C
ONTROLS
C
ONTROLS
RY
Press "start/pause" or
change your selection below.
options
dryness level
normal dry
cycle chime loud
remind chime ON
regular
temperature
very dry – used to completely dry sturdy or bulky items
including towels and jeans.
more dry – uses slightly less time to dry than very dry with
similar results. May find some blue jean seams slightly damp.
normal – used for drying the majority of loads.
less dry – still provides the benefit of the load being slightly
damp, but items will dry faster once they are laid flat or hung
to dry.
damp dry – designed to partially dry items. Used for items
that lay flat or hang to dry.
regular – for sturdy cottons or those labeled "Tumble Dry."
medium – for permanent press, synthetics, lightweight cot-
tons or items labeled "Tumble Dry Medium."
delicate – for heat sensitive items labeled "Tumble Dry
Low" or "Tumble Dry Warm."
extra low – Provides the lowest heated dry temperature pos-
sible. "Extra Low Temperature" is lower than "Delicate."
6

Publicidad

loading

Este manual también es adecuado para:

NeptuneMd75