Ignition Of Gas Stove Burners; Ignition Of Oven Burners - Bartscher FA092M00 Manual De Instalación, Uso Y Mantenimiento

5.2.

Ignition of gas stove burners

IGNITION
A) Press the control knob of the selected gas
stove burner and turn it left in order to ignite the
ignition flame (position 1). Ignite the ignition
flame with use of a match.
B) Hold the control knob pressed for approx. 10
seconds in order to heat up the thermal
element; then release the controller.
SWITCHING OFF
A) Turn the control knob right in order to switch
the gas stove burner off (position 1).
Pos. 0 Pos. 1
5.3.

Ignition of oven burners

A) Press the control knob and turn it left, while
simultaneously pressing
ignition a few times (C), in order to ignite the
ignition flame (position 1). Hold the control
knob pressed for approx. 10 seconds in order
to heat up the thermal element.
Hint: Ignition flame may be also ignited
manually using a match through the cover
at the oven bottom.
Temperature °C
Time in minutes
Pos 0
Pos. 2
the piezoelectric
60 90 120
3 6 9
Pos 1 Pos 2
C) To ignite the gas stove burner, turn the control
knob left (position 2).
D) Set the power of the gas stove burner
(position 3).
B) To put out the ignition flame rotate the control
knob clockwise (position 0).
Pos. 3
ID 04
B) Turn the control knob left, set the
temperature between 60°C and 280°C
and wait until the oven heats up
(position 2).
160 200 240
12 15 18
ID 05
7
ENGLISH
280 300
22 26
GB