Replacement Of Nozzle And Adjustment Of Oven Burner Primary Air Supply; Replacement Of The Ignition Flame Nozzle Of The Oven Burners - Bartscher FA092M00 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
9.5.

Replacement of nozzle and adjustment of oven burner primary air supply

Follow the instructions below.
Close the gas cut-off valve.
Remove the lower panel of the oven (A).
When required, replace the nozzle (B) with a
nozzle
appendices).
GN 2/1
GB
9.6.

Replacement of the ignition flame nozzle of the oven burners

Follow the instructions below.
Close the gas cut-off valve.
Remove the oven bottom (A) and grill (B).
The ignition flame is assigned to the burner.
Loosen the nut (D).
intended for used
B
A
ID 07
Loosen screw C and set the Venturi pipe (D).
Tighten the screw (C) and restore the initial
settings.
gas (see
A
Remove the nozzle (E) and replace it with a
nozzle intended for the used gas (see
attached tables).
Tighten the nut and restore the initial settings.
16
H
B D C
D
E