Replacement Of Nozzle And Adjustment Of Gas Stove Burner Primary Air Supply; Replacement Of The Ignition Flame Nozzles Of The Gas Stove Burners - Bartscher FA092M00 Manual De Instalación, Uso Y Mantenimiento

9.3.

Replacement of nozzle and adjustment of gas stove burner primary air supply

Follow the instructions below.
Close the gas cut-off valve.
Remove the gas burners grates (A).
Remove the flame distributor (B) and
burner body (C).
Remove the recesses (D).
B
C
A
D
9.4.

Replacement of the ignition flame nozzles of the gas stove burners

Follow the instructions below.
Close the gas cut-off valve.
Remove the gas burners grates (A).
Remove the flame distributors (B)
and burners bodies (C).
B
C
A
D
Loosen the screw E and set the Venturi pipe
(F).
When required, replace the nozzle (G) with a
nozzle
appendices).
Tighten the screw E and restore the initial
settings.
E
F
G
ID 06
Remove the recesses (D).
Replace the gas burner ignition flame
nozzles (E).
Restore the initial settings.
E
15
ENGLISH
intended for used gas (see
GB
ID 15