Technical Data; Notes On Safety; Symbols Used In The Instructions; Symbols On The Device - Grizzly ELS 3017 E Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
GB
ance is double-insulated, and does not need
to be earthed.
Refer to the following descriptions for in-
structions on how the operating controls
work.

Technical Data

Foliage vacuum .............
Rated input voltage ...... 230-240 V, 50 Hz
Input power ............................... 3000 W
Idling speed (n
) .. 8000-14000 min
0
Safety class ......................................
Protection category ......................... IP 20
Air capacity ................... max. 17 m
Air speed ........................ max. 300 km/h
Content of the collection bag .............. 45 l
Weight (incl. accessories kit) ........ 5,14 kg
Sound pressure level
(L
) ................ 93,8 dB(A); K
PA
Sound power level (L
measured ........ 101 dB(A); K
guaranteed ......................... 102 dB(A)
Vibration (a
)
h
at the handle ...................... 2,928 m/s
at the additional grip.............. 3,1 m/s
Noise and vibration values were determined
according to the standards and stipulations
designated in the Declaration of Conformity.
Noise and Vibration: The operating condi-
tions during measuring and the procedures
used for measuring in accordance with
EN 15503, Appendix A, Appendix B.
Technical and optical changes can be car-
ried out in the course of the further develop-
ment without announcement. All measures,
references and information contained in
this operating manual are therefore without
guarantee. Legal claims, which are made
on the basis of the operating manual, can-
not be considered.
136
ELS 3017 E
(rpm)
-1
/min
3
= 3,0 dB
PA
)
WA
= 3,0 dB
WA
K=1,5 m/s
This device is designed for operation on a
power supply network with a system imped-
ance Zmax at the transfer point (domestic
connection) of a maximum of 0.28 Ohms.
The user must ensure that the device is oper-
ated only on a power supply network that
fulfils this requirement. If necessary, the local
power supply company can be asked for
the system impedance.

Notes on safety

II
This section deals with the basic sa-
fety regulations to be observed when
working with the machine.
Symbols used in the
instructions
Hazard symbol (explanation
of hazard partly instead of
exclamation mark) with in-
formation on prevention of
personal injury and property
damage.
2
;
2
Precaution symbol (explanation of
2
precaution partly instead of exclama-
tion mark) with information on pre-
vention of harm / damage.
Notice symbol with information on
how to handle the device properly.

Symbols on the device

Caution, danger !
Read through the operating manual
carefully before using the device.
Danger due to materials blown out
of machine! Remove persons in the
vicinity from the danger area.

Publicidad

Tabla de contenido
loading

Tabla de contenido