End Of Dry Cycle; Empty The Water Tank - Haier HD70-A82 Manual De Instrucciones

END OF DRY CYCLE

The tumble dryer stops operation
automatically when a dry cycle is
complete. The display shows END. Open
the tumble dryer door and remove the
laundry. If the laundry is not removed the
anti-crease program starts automatically.
1 Switch off the tumble dryer by pressing
the Power button.
2 Unplug the tumble dryer from the
power socket.
3 Empty the water tank after each dry
cycle.
4 Clean the lint filter after each dry
cycle.
5 Clean the condenser filter approx.
every 20 dry cycles.

EMPTY THE WATER TANK

During operation, steam condenses to
water which is collected in the water
tank. Empty the water tank after each
drying cycle.
1 Pull out the water tank from its
housing.
2 Empty the water tank.
3 Reinstall the water tank to the tumble
dryer.
Note: Do not use the water for any
kind of drinking or food processing.
16 | English
1
3
5
1
3
2
4
2