LINT FILTER CLEANING
Clean the lint filter after each dry
cycle.
1 Re move the lint filter from the drum.
2 Open up the lint filter.
3 Clean the lint filter form any lint
residuals.
4 Reinstall the cleaned lint filter in the
tumble dryer.
Note: if the lint filter is very dirty, it
can be cleaned under running water.
Let it dry thoroughly before use.
CONDENSER FILTER CLEANING
Clean the condenser filter approx.
every 20 dry cycles.
1 Open the Service door.
2 Open the four levers of the condenser
filter.
3 Pull out the condenser filter from its
housing.
4 Remove the rear filter screen.
5 Clean the condenser filter form any
residuals.
6 Reinstall the rear filter to the
condenser filter.
To reinstall the condenser filter, follow
the above steps 3 to 1 in reverse order.
Note: if the condenser filter is very
dirty, it can be cleaned under running
water. Let it dry thoroughly before
use.
1
3
1
3
5
2
4
2
4
6
English | 17