UNPACKING
1.
The refrigerator must be moved only using a service-lift, the power of which must be adequate to the
weight of the refrigerator, the service-lift should be operated only by qualified staff.
Remove the packing from the apparatus and also the transport supports, first taking off the lower cover.
All packanging materials are recyclable and to be disposed of in accordance with local regulations;
be careful to destroy "plastic" bags in order to avoid children suffocation.
STORAGE
2.
Appliances and possibile packaging must be carefully stored in sheltered warehouses or locations,
Goods must be protected from damage due to the adverse climatic effects of the sun, rain, cold or
humidity at a temperature ranging from 0 and +40 °C.
SETTING THE REFRIGERATOR OUT OF ORDER
3.
The set contains substances ozone-damaging. Therefore,
is must be disposed of in proper centres in accordance with local regulations.
4.
CLEANING
STAINLESS STEEL SURFACES :
Wash with warm water and mild detergent, rinse well and dry with soft cloth.
Avoid scouring pads etc. which will spoil the finish of the stainless steel.
ACRYLIC AND/OR POLYCARBONATE SURFACES :
Wash with lukewarm water, using a soft cloth or chamois cloth. If necessary,
use a water solution with neutral soap. Rinse with water and dry with a soft cloth.
Do not use abrasives, alcohol, acetone or solvents: they can cause scratching or corrosion.
GLASS SURFACES:
Only use products specifically designed for glass cleaning.
It is not advisable to use ordinary water which can leave a film of calcium on the surface of the glass.
If it were necessary to set the refrigerator out of order after a long period of
operation, be careful to:
1) Make it unusable (for example, cutting the supply cable).
2) Remove any door or object that may result dangerous to children.
4