ISA TORNADO Serie Instrucciones De Uso Y Manutención página 45

Appliance disposal (user)
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed aver to the applicable collection point far the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences far the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your local city office, your Household waste
disposal service or the shop where you purchased the product.
Procedures for disposal and recycling at the end of product life cycle
1. Switch the counter off and unplug it.
2. Remove and dispose of lamps.
3. Remove and dispose of the switchboards and the electronic boards.
4. Disassemble all independent parts (grills, carter , profiles etc.) and separate them on the basis of types
of homogeneous materials in order to reach the heat exchanger, the pipes, the cables etc.
taking care not to damage the refrigerant circuit.
5. Disassemble all movable parts (doors, locks, glasses, etc.), split up the different materials according
to the homogeneous characteristics.
6. Check the type of refrigerant on the label placed inside the counter. Take out and dispose of
the refrigerant through the authorised services.
7. Disconnect evaporator, condenser, compressor, pipes and fans. These parts, made of copper,
aluminium, steel and plastics, have to be disposed of separately.
8. After removing all coverings and various components from the body, split up the different types of
materials (plastic, metal, polyurethane, copper, etc.) and gather them according to homogeneous
characteristics.
All recyclable materials and waste must be treated and recycled in a professional manner and in accordance with the
directives of each specific country in question.
The company responsible for recycling must be registered and certified as a waste disposal service according to the
specific directives of each specific country.
GENERAL CONDITIONS OF WARRANTY
Seller guarantees equipment for twelve months running from delivery. Warranty includes repair or replacement of
defective parts due to fabrication or installation after written communication about serial code and data of installation. All
defects such as incorrect use of equipment, inappropriate electrical connection, normal consumption (for example
compressor breaks and fluorescent lamp malfunctioning which do not depend on fabrication defects), as well as calls for
installations, technical instructions, adjustements and compressor cleaning are not included in the warranty. In case
seller' s technicians retrieve tampering, not authorised repairs, inappropriate use of equipment, the guarantee will not
cover the goods. Shipments of components under guarantee will be made exclusively freight collect. Possible damages
of equipment due to transport must be noticed in the same shipping document for refunding. In any case seller is not
responsible for damages to products conserved inside because of malfunctioning of the equipment
(For Authorised Institution)
8
.